Rear Triangulated Ladder Bar Suspension Kit Steel

Hot Rod Triangulated Ladder Bar Kit Complete


Ladder bars made from 7/8" OD steel tubing. Features traditional style clevis adjusters and easy to weld, forged housing brackets designed for 3" housings. Front crossmember width: 43 1/8". Welding required. SOLD AS KIT
: $549.99


Universal Application

Front Crossmember Width: 43 1/8" (Trim to desired width)
For Housing Diameter: 3"
Axle Center to Center of Front Mount: 45 1/2"

Originally designed for use on 1928 - 1934 Fords but now commonly used on all sorts of early hot rods, customs, and gassers. The front crossmember measures 43 1/8" wide and features a 5" drop leaving ample space for the drive shaft. Ladder bars use traditional style clevis adjusters. The easy to weld forged housing brackets have been carefully engineered to mount at an angle on a 3" rear housing and match the forged gussets in the ladder bars. Flame cut steel brackets for a 3 1/2" housing are available upon request. Contact our sales team for more information.


1 (ONE)
Weld In Front X-Member2 (TWO)Forged Steel 3" Housing Brackets
2 (TWO) Fabricated Ladder Bars With Forged Gussets 4 (FOUR)Front Bushing Halves
2 (TWO)Front Bushing Sleeves4 (FOUR)5/8" - 18 Clevis For 7/16" Bolt
4 (FOUR) 5/8"-18 Jam Nuts for Clevises2 (TWO)Front Mounting Bolts With Nyloc Nuts
4 (FOUR) Clevis Mounting Bolts With Nyloc Nuts


This kit is designed for professional builders only, and should only be installed by a qualified professional. Roadster Supply Company is not responsible for any suspension damage, or other damage, caused from improper installation.

1932 - 1934 Rear Ladder Bars Steel With Clevises
: $349.99

Hot Rod Rear Ladder Bars 1932 - 1934

Share your knowledge of this product. Be the first to write a review »