Front Panhard Bar Plain Steel With Stamped Frame Bracket

FEATURES:

Choose from various industry standard lengths.
See Notes & Tips below for common Hot Rod applications.

Overall Adjustment In: 0.750"
Overall Adjustment Out: 1.125"
Heim Joint ID: 0.500"

Overall adjustment measurements are based on safe operating thread engagement. All threads are tapped extra deep to allow slight trimming of bar if necessary. The stamped frame bracket places the heim joint between two walls for a double shear mount. This kit is also available in polished stainless steel. Search for Polished Panhard Kit in the search box to learn more.

WHAT'S INCLUDED:

1 (ONE)	3/4" OD Plain Steel Panhard Bar Link
1 (ONE)	Stamped Steel Frame Mounting Tab
1 (ONE)	Left Hand Thread Steel Heim Joint Assembly
1 (ONE)	Right Hand Thread Steel Heim Joint Assembly
2 (TWO)	Steel Jam Nuts (1 Left and 1 Right)
1 (ONE)	Mounting Hardware Kit

NOTES & TIPS:

We recommend always measuring before buying any panhard bar kit.

Typical uses include:

Stock Width 1932 Frame with 34" Perch Width Center to Center Axle: Use 28" C-C Panhard (20428)
Stock Width 1932 Frame with 36 1/2" Perch Width Center to Center Axle: Use 29" C-C Panhard (20429)
Pinched Nose 1932 Frame with 34" Perch Width Center to Center Axle: Use 27" C-C Panhard (20427)
Pinched Nose 1932 Frame with 36 1/2" Perch Width Center to Center Axle: Use 28" C-C Panhard (20428)

Front Panhard Bar Plain Steel With Stamped Frame Bracket - Specify Length

COMPANY

ACCOUNT

CONTACT US